From owner-fsj-digest-at-digest.net Fri Nov 18 06:55:38 2005 From: fsj-digest fsj-digest Friday, November 18 2005 Volume 01 : Number 2539 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: fsj: Re: Re: SuperDawg Pix 1 Re: fsj: Re: SuperDawg Pix 1 fsj: Re: Re: SuperDawg Pix 1 Re: fsj: Re: SuperDawg Pix 1 fsj: RE: Re: Re: SuperDawg Pix 1 fsj: Re: Re: SuperDawg Pix 1 fsj: Re: SuperDawg Pix 1 fsj: Re: SuperDawg Pix 1 fsj: Re: SuperDawg Pix 1 FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Thu, 17 Nov 2005 07:35:17 -0500 From: "Neal Hoover" Subject: fsj: Re: Re: SuperDawg Pix 1 hey, hold on a minute.... i thought that *I* was the one who came up with the idea of a bed and cab trolly to make wheeling stuff around the garage much easier.... http://community.webshots.com/photo/175759714/175760206scDMnJ and http://community.webshots.com/photo/175759714/359967949mTfWLd lol! nice work on the undercoating, John. what brand did you use? also, tell me about the spray gun. where'd you get it? and how much? Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "Curtis" Cc: "full size jeep list" Sent: Thursday, November 17, 2005 1:31 AM Subject: fsj: Re: SuperDawg Pix 1 > so the real question is, does it make the cab quieter? :) > > (hard to tell without glass I'd guess... ;) > > http://wagoneers.com/tmp/superdawg-2005/ALL.html > > On Wed, 16 Nov 2005, Curtis wrote: > > > -->Hi John, > > --> > > -->Here are some pictures for your enjoyment. None of them are labeled. > > -->These are before bedlining and after for the interior of the cab. A few > > -->select pictures of my new lift too. > > -->The next e-mail shows more during and after shots of the bed. I think there > > -->is a comparison of core supports too. > > --> > > -->I hope you are enjoying your new job and shorter commute. > > the hours are a bit challenging... getting up at 5:30am is quite difficult... ;) > > john > > > --> > > -->Ttyl, > > --> > > -->Curtis > > --> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Thu, 17 Nov 2005 05:13:12 -0800 (PST) From: elliott sydnam Subject: Re: fsj: Re: SuperDawg Pix 1 Excellent, and what a clean truck to start with, wow! Very nice John! Eliott - --- john wrote: > so the real question is, does it make the cab > quieter? :) > > (hard to tell without glass I'd guess... ;) > > http://wagoneers.com/tmp/superdawg-2005/ALL.html > > On Wed, 16 Nov 2005, Curtis wrote: > > > -->Hi John, > > --> > > -->Here are some pictures for your enjoyment. > None of them are labeled. > > -->These are before bedlining and after for the > interior of the cab. A few > > -->select pictures of my new lift too. > > -->The next e-mail shows more during and after > shots of the bed. I think there > > -->is a comparison of core supports too. > > --> > > -->I hope you are enjoying your new job and > shorter commute. > > the hours are a bit challenging... getting up at > 5:30am is quite difficult... ;) > > john > > > --> > > -->Ttyl, > > --> > > -->Curtis > > --> > > ---- > > - ------------------------------------------------------------------------- > ** http://JohnMeister.com **** > http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't > rust, they mold > ** http://freegift.net *** > http://greatcom.org/laws/languages.html ** > - ------------------------------------------------------------------------- ------------------------------ Date: Thu, 17 Nov 2005 06:29:25 -0800 (PST) From: john Subject: fsj: Re: Re: SuperDawg Pix 1 On Thu, 17 Nov 2005, Neal Hoover wrote: >-->hey, hold on a minute.... i thought that *I* was the one who came up with >-->the idea of a bed and cab trolly to make wheeling stuff around the garage >-->much easier.... it's been done before... ;) >-->http://community.webshots.com/photo/175759714/175760206scDMnJ >-->and >-->http://community.webshots.com/photo/175759714/359967949mTfWLd >-->lol! >--> >-->nice work on the undercoating, John. what brand did you use? same one curtis used on the trailer... It's the stuff you can get at schucks, dupicolor I think... nice thing about it is you can touch it up with a rattle can... have one out in the trailer. >-->also, tell me about the spray gun. where'd you get it? and how much? oh curtis... (he's got it all figured out... ;) john >--> >-->Neal A. Hoover >-->Project '76 J-10 >-->Project '96 XJ >-->http://community.webshots.com/user/proj96xj >--> >--> >-->----- Original Message ----- >-->From: "john" >-->To: "Curtis" >-->Cc: "full size jeep list" >-->Sent: Thursday, November 17, 2005 1:31 AM >-->Subject: fsj: Re: SuperDawg Pix 1 >--> >--> >-->> so the real question is, does it make the cab quieter? :) >-->> >-->> (hard to tell without glass I'd guess... ;) >-->> >-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html >-->> >-->> On Wed, 16 Nov 2005, Curtis wrote: >-->> >-->> > -->Hi John, >-->> > --> >-->> > -->Here are some pictures for your enjoyment. None of them are labeled. >-->> > -->These are before bedlining and after for the interior of the cab. A >-->few >-->> > -->select pictures of my new lift too. >-->> > -->The next e-mail shows more during and after shots of the bed. I >-->think there >-->> > -->is a comparison of core supports too. >-->> > --> >-->> > -->I hope you are enjoying your new job and shorter commute. >-->> >-->> the hours are a bit challenging... getting up at 5:30am is quite >-->difficult... ;) >-->> >-->> john >-->> >-->> > --> >-->> > -->Ttyl, >-->> > --> >-->> > -->Curtis >-->> > --> >-->> >-->> ---- >-->> >-->> ------------------------------------------------------------------------- >-->> ** http://JohnMeister.com **** http://wagoneers.com ** >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold >-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** >-->> ------------------------------------------------------------------------- >--> >--> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Thu, 17 Nov 2005 06:30:34 -0800 (PST) From: john Subject: Re: fsj: Re: SuperDawg Pix 1 On Thu, 17 Nov 2005, elliott sydnam wrote: >-->Excellent, and what a clean truck to start with, wow! >-->Very nice John! thanx... curtis is doing a superb job... kind of why I'm not terribly upset it's taken over 4 years now... john >--> >-->Eliott >--> >--> >-->--- john wrote: >--> >-->> so the real question is, does it make the cab >-->> quieter? :) >-->> >-->> (hard to tell without glass I'd guess... ;) >-->> >-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html >-->> >-->> On Wed, 16 Nov 2005, Curtis wrote: >-->> >-->> > -->Hi John, >-->> > --> >-->> > -->Here are some pictures for your enjoyment. >-->> None of them are labeled. >-->> > -->These are before bedlining and after for the >-->> interior of the cab. A few >-->> > -->select pictures of my new lift too. >-->> > -->The next e-mail shows more during and after >-->> shots of the bed. I think there >-->> > -->is a comparison of core supports too. >-->> > --> >-->> > -->I hope you are enjoying your new job and >-->> shorter commute. >-->> >-->> the hours are a bit challenging... getting up at >-->> 5:30am is quite difficult... ;) >-->> >-->> john >-->> >-->> > --> >-->> > -->Ttyl, >-->> > --> >-->> > -->Curtis >-->> > --> >-->> >-->> ---- >-->> >-->> >-->------------------------------------------------------------------------- >-->> ** http://JohnMeister.com **** >-->> http://wagoneers.com ** >-->> Snohomish, Washington USA - where Jeeps don't >-->> rust, they mold >-->> ** http://freegift.net *** >-->> http://greatcom.org/laws/languages.html ** >-->> >-->------------------------------------------------------------------------- >--> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Thu, 17 Nov 2005 10:14:51 -0700 From: Tesar Landon-r16884 Subject: fsj: RE: Re: Re: SuperDawg Pix 1 I remember, had the whole pickup bed on it, really slick. - - L - -----Original Message----- From: owner-fsj-at-digest.net [mailto:owner-fsj-at-digest.net] Sent: Thursday, November 17, 2005 6:35 AM To: john; Curtis Cc: full size jeep list Subject: fsj: Re: Re: SuperDawg Pix 1 hey, hold on a minute.... i thought that *I* was the one who came up with the idea of a bed and cab trolly to make wheeling stuff around the garage much easier.... http://community.webshots.com/photo/175759714/175760206scDMnJ and http://community.webshots.com/photo/175759714/359967949mTfWLd lol! nice work on the undercoating, John. what brand did you use? also, tell me about the spray gun. where'd you get it? and how much? Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "Curtis" Cc: "full size jeep list" Sent: Thursday, November 17, 2005 1:31 AM Subject: fsj: Re: SuperDawg Pix 1 > so the real question is, does it make the cab quieter? :) > > (hard to tell without glass I'd guess... ;) > > http://wagoneers.com/tmp/superdawg-2005/ALL.html > > On Wed, 16 Nov 2005, Curtis wrote: > > > -->Hi John, > > --> > > -->Here are some pictures for your enjoyment. None of them are labeled. > > -->These are before bedlining and after for the interior of the cab. A few > > -->select pictures of my new lift too. > > -->The next e-mail shows more during and after shots of the bed. I think there > > -->is a comparison of core supports too. > > --> > > -->I hope you are enjoying your new job and shorter commute. > > the hours are a bit challenging... getting up at 5:30am is quite difficult... ;) > > john > > > --> > > -->Ttyl, > > --> > > -->Curtis > > --> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Thu, 17 Nov 2005 19:28:48 -0500 From: "Neal Hoover" Subject: fsj: Re: Re: SuperDawg Pix 1 git you some, Curtis! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "Neal Hoover" Cc: "Curtis" ; "full size jeep list" Sent: Thursday, November 17, 2005 9:29 AM Subject: Re: Re: SuperDawg Pix 1 > On Thu, 17 Nov 2005, Neal Hoover wrote: > > >-->hey, hold on a minute.... i thought that *I* was the one who came up with > >-->the idea of a bed and cab trolly to make wheeling stuff around the garage > >-->much easier.... > > it's been done before... ;) > > >-->http://community.webshots.com/photo/175759714/175760206scDMnJ > >-->and > >-->http://community.webshots.com/photo/175759714/359967949mTfWLd > >-->lol! > >--> > >-->nice work on the undercoating, John. what brand did you use? > > same one curtis used on the trailer... It's the stuff you can > get at schucks, dupicolor I think... nice thing about it is you > can touch it up with a rattle can... have one out in the trailer. > > >-->also, tell me about the spray gun. where'd you get it? and how much? > > oh curtis... (he's got it all figured out... ;) > > john > > >--> > >-->Neal A. Hoover > >-->Project '76 J-10 > >-->Project '96 XJ > >-->http://community.webshots.com/user/proj96xj > >--> > >--> > >-->----- Original Message ----- > >-->From: "john" > >-->To: "Curtis" > >-->Cc: "full size jeep list" > >-->Sent: Thursday, November 17, 2005 1:31 AM > >-->Subject: fsj: Re: SuperDawg Pix 1 > >--> > >--> > >-->> so the real question is, does it make the cab quieter? :) > >-->> > >-->> (hard to tell without glass I'd guess... ;) > >-->> > >-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html > >-->> > >-->> On Wed, 16 Nov 2005, Curtis wrote: > >-->> > >-->> > -->Hi John, > >-->> > --> > >-->> > -->Here are some pictures for your enjoyment. None of them are labeled. > >-->> > -->These are before bedlining and after for the interior of the cab. A > >-->few > >-->> > -->select pictures of my new lift too. > >-->> > -->The next e-mail shows more during and after shots of the bed. I > >-->think there > >-->> > -->is a comparison of core supports too. > >-->> > --> > >-->> > -->I hope you are enjoying your new job and shorter commute. > >-->> > >-->> the hours are a bit challenging... getting up at 5:30am is quite > >-->difficult... ;) > >-->> > >-->> john > >-->> > >-->> > --> > >-->> > -->Ttyl, > >-->> > --> > >-->> > -->Curtis > >-->> > --> > >-->> > >-->> ---- > >-->> > >-->> ---------------------------------------------------------------------- - --- > >-->> ** http://JohnMeister.com **** http://wagoneers.com ** > >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > >-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > >-->> ---------------------------------------------------------------------- - --- > >--> > >--> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Fri, 18 Nov 2005 00:29:59 -0800 From: Curtis Subject: fsj: Re: SuperDawg Pix 1 Ok you guys. As much as I hate to admit it, SuperDawg has been on those dollies since 2002. Also, I have been using that same method since the 80's. I am also sure that others have done it before me. As for the bedliner, it is Duplicolor bedliner. John brought me a can of it once and told me that it is what he wanted me to use, so I tried it and he liked it. It can be had at Schucks/Kraken/CSK auto parts stores among others for around $50 a gallon. The spraygun is just a cheap undercoating gun that I buy disposable cups for. If I remember I will get a picture of it tomorrow and send it to John to post on his website. The gun, or reasonable facsimile, can be had for about $30 at the above mentioned autoparts stores, or pretty much any other auto paint supplier. As for the compliments, (In my best Elvis voice.) Thank you, thank you. :) Curtis john wrote: > On Thu, 17 Nov 2005, Neal Hoover wrote: > > >>-->hey, hold on a minute.... i thought that *I* was the one who came up with >>-->the idea of a bed and cab trolly to make wheeling stuff around the garage >>-->much easier.... > > > it's been done before... ;) > > >>-->http://community.webshots.com/photo/175759714/175760206scDMnJ >>-->and >>-->http://community.webshots.com/photo/175759714/359967949mTfWLd >>-->lol! >>--> >>-->nice work on the undercoating, John. what brand did you use? > > > same one curtis used on the trailer... It's the stuff you can > get at schucks, dupicolor I think... nice thing about it is you > can touch it up with a rattle can... have one out in the trailer. > > >>-->also, tell me about the spray gun. where'd you get it? and how much? > > > oh curtis... (he's got it all figured out... ;) > > john > > >>--> >>-->Neal A. Hoover >>-->Project '76 J-10 >>-->Project '96 XJ >>-->http://community.webshots.com/user/proj96xj >>--> >>--> >>-->----- Original Message ----- >>-->From: "john" >>-->To: "Curtis" >>-->Cc: "full size jeep list" >>-->Sent: Thursday, November 17, 2005 1:31 AM >>-->Subject: fsj: Re: SuperDawg Pix 1 >>--> >>--> >>-->> so the real question is, does it make the cab quieter? :) >>-->> >>-->> (hard to tell without glass I'd guess... ;) >>-->> >>-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html >>-->> >>-->> On Wed, 16 Nov 2005, Curtis wrote: >>-->> >>-->> > -->Hi John, >>-->> > --> >>-->> > -->Here are some pictures for your enjoyment. None of them are labeled. >>-->> > -->These are before bedlining and after for the interior of the cab. A >>-->few >>-->> > -->select pictures of my new lift too. >>-->> > -->The next e-mail shows more during and after shots of the bed. I >>-->think there >>-->> > -->is a comparison of core supports too. >>-->> > --> >>-->> > -->I hope you are enjoying your new job and shorter commute. >>-->> >>-->> the hours are a bit challenging... getting up at 5:30am is quite >>-->difficult... ;) >>-->> >>-->> john >>-->> >>-->> > --> >>-->> > -->Ttyl, >>-->> > --> >>-->> > -->Curtis >>-->> > --> >>-->> >>-->> ---- >>-->> >>-->> ------------------------------------------------------------------------- >>-->> ** http://JohnMeister.com **** http://wagoneers.com ** >>-->> Snohomish, Washington USA - where Jeeps don't rust, they mold >>-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** >>-->> ------------------------------------------------------------------------- >>--> >>--> > > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Fri, 18 Nov 2005 07:14:51 -0500 From: "Neal Hoover" Subject: fsj: Re: SuperDawg Pix 1 keep it up, Curtis! btw, not to steal a thread, but does anyone know where i can get a rust-free (ha) 7' fleetside bed? none of the beds i have are worth the trouble right now, and i'm trying to find a good one. thanks! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Curtis" To: "john" Cc: "Neal Hoover" ; "full size jeep list" Sent: Friday, November 18, 2005 3:16 AM Subject: Re: SuperDawg Pix 1 > Ok you guys. As much as I hate to admit it, SuperDawg has been on those > dollies since 2002. Also, I have been using that same method since the > 80's. I am also sure that others have done it before me. > > As for the bedliner, it is Duplicolor bedliner. John brought me a can > of it once and told me that it is what he wanted me to use, so I tried > it and he liked it. It can be had at Schucks/Kraken/CSK auto parts > stores among others for around $50 a gallon. The spraygun is just a > cheap undercoating gun that I buy disposable cups for. If I remember I > will get a picture of it tomorrow and send it to John to post on his > website. The gun, or reasonable facsimile, can be had for about $30 at > the above mentioned autoparts stores, or pretty much any other auto > paint supplier. > > As for the compliments, (In my best Elvis voice.) Thank you, thank you. > :) > > Curtis > > > > john wrote: > > On Thu, 17 Nov 2005, Neal Hoover wrote: > > > > > >>-->hey, hold on a minute.... i thought that *I* was the one who came up with > >>-->the idea of a bed and cab trolly to make wheeling stuff around the garage > >>-->much easier.... > > > > > > it's been done before... ;) > > > > > >>-->http://community.webshots.com/photo/175759714/175760206scDMnJ > >>-->and > >>-->http://community.webshots.com/photo/175759714/359967949mTfWLd > >>-->lol! > >>--> > >>-->nice work on the undercoating, John. what brand did you use? > > > > > > same one curtis used on the trailer... It's the stuff you can > > get at schucks, dupicolor I think... nice thing about it is you > > can touch it up with a rattle can... have one out in the trailer. > > > > > >>-->also, tell me about the spray gun. where'd you get it? and how much? > > > > > > oh curtis... (he's got it all figured out... ;) > > > > john > > > > > >>--> > >>-->Neal A. Hoover > >>-->Project '76 J-10 > >>-->Project '96 XJ > >>-->http://community.webshots.com/user/proj96xj > >>--> > >>--> > >>-->----- Original Message ----- > >>-->From: "john" > >>-->To: "Curtis" > >>-->Cc: "full size jeep list" > >>-->Sent: Thursday, November 17, 2005 1:31 AM > >>-->Subject: fsj: Re: SuperDawg Pix 1 > >>--> > >>--> > >>-->> so the real question is, does it make the cab quieter? :) > >>-->> > >>-->> (hard to tell without glass I'd guess... ;) > >>-->> > >>-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html > >>-->> > >>-->> On Wed, 16 Nov 2005, Curtis wrote: > >>-->> > >>-->> > -->Hi John, > >>-->> > --> > >>-->> > -->Here are some pictures for your enjoyment. None of them are labeled. > >>-->> > -->These are before bedlining and after for the interior of the cab. A > >>-->few > >>-->> > -->select pictures of my new lift too. > >>-->> > -->The next e-mail shows more during and after shots of the bed. I > >>-->think there > >>-->> > -->is a comparison of core supports too. > >>-->> > --> > >>-->> > -->I hope you are enjoying your new job and shorter commute. > >>-->> > >>-->> the hours are a bit challenging... getting up at 5:30am is quite > >>-->difficult... ;) > >>-->> > >>-->> john > >>-->> > >>-->> > --> > >>-->> > -->Ttyl, > >>-->> > --> > >>-->> > -->Curtis > >>-->> > --> > >>-->> > >>-->> ---- > >>-->> > >>-->> --------------------------------------------------------------------- - ---- > >>-->> ** http://JohnMeister.com **** http://wagoneers.com ** > >>-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > >>-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > >>-->> --------------------------------------------------------------------- - ---- > >>--> > >>--> > > > > > > ---- > > > > ------------------------------------------------------------------------- > > ** http://JohnMeister.com **** http://wagoneers.com ** > > Snohomish, Washington USA - where Jeeps don't rust, they mold > > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > > ------------------------------------------------------------------------- ------------------------------ Date: Fri, 18 Nov 2005 06:51:02 -0800 (PST) From: john Subject: fsj: Re: SuperDawg Pix 1 2002 or 2001 curtis? ;) seems to me you had that cab sitting on something out there in lacey... :) john On Fri, 18 Nov 2005, Curtis wrote: > -->Ok you guys. As much as I hate to admit it, SuperDawg has been on those > -->dollies since 2002. Also, I have been using that same method since the > -->80's. I am also sure that others have done it before me. > --> > -->As for the bedliner, it is Duplicolor bedliner. John brought me a can of it > -->once and told me that it is what he wanted me to use, so I tried it and he > -->liked it. It can be had at Schucks/Kraken/CSK auto parts stores among > -->others for around $50 a gallon. The spraygun is just a cheap undercoating > -->gun that I buy disposable cups for. If I remember I will get a picture of > -->it tomorrow and send it to John to post on his website. The gun, or > -->reasonable facsimile, can be had for about $30 at the above mentioned > -->autoparts stores, or pretty much any other auto paint supplier. > --> > -->As for the compliments, (In my best Elvis voice.) Thank you, thank you. > -->:) > --> > -->Curtis > --> > --> > --> > -->john wrote: > -->> On Thu, 17 Nov 2005, Neal Hoover wrote: > -->> > -->> > -->> > --> hey, hold on a minute.... i thought that *I* was the one who > -->> > --> came up with > -->> > --> the idea of a bed and cab trolly to make wheeling stuff > -->> > --> around the garage > -->> > --> much easier.... > -->> > -->> > -->> it's been done before... ;) > -->> > -->> > --> http://community.webshots.com/photo/175759714/175760206scDMnJ > -->> > --> and > -->> > --> http://community.webshots.com/photo/175759714/359967949mTfWLd > -->> > --> lol! > -->> > --> > -->> > --> nice work on the undercoating, John. what brand did you > -->> > --> use? > -->> > -->> > -->> same one curtis used on the trailer... It's the stuff you can > -->> get at schucks, dupicolor I think... nice thing about it is you > -->> can touch it up with a rattle can... have one out in the trailer. > -->> > -->> > -->> > --> also, tell me about the spray gun. where'd you get it? and > -->> > --> how much? > -->> > -->> > -->> oh curtis... (he's got it all figured out... ;) > -->> > -->> john > -->> > -->> > -->> > --> > -->> > --> Neal A. Hoover > -->> > --> Project '76 J-10 > -->> > --> Project '96 XJ > -->> > --> http://community.webshots.com/user/proj96xj > -->> > --> > -->> > --> > -->> > --> ----- Original Message ----- From: "john" > -->> > --> > -->> > --> To: "Curtis" > -->> > --> Cc: "full size jeep list" > -->> > --> Sent: Thursday, November 17, 2005 1:31 AM > -->> > --> Subject: fsj: Re: SuperDawg Pix 1 > -->> > --> > -->> > --> > -->> > --> > so the real question is, does it make the cab quieter? > -->> > --> > :) > -->> > --> > > -->> > --> > (hard to tell without glass I'd guess... ;) > -->> > --> > > -->> > --> > http://wagoneers.com/tmp/superdawg-2005/ALL.html > -->> > --> > > -->> > --> > On Wed, 16 Nov 2005, Curtis wrote: > -->> > --> > > -->> > --> > > --> Hi John, > -->> > --> > > --> > -->> > --> > > --> Here are some pictures for your enjoyment. > -->> > --> > > --> None of them are labeled. > -->> > --> > > --> These are before bedlining and after for > -->> > --> > > --> the interior of the cab. A > -->> > --> few > -->> > --> > > --> select pictures of my new lift too. > -->> > --> > > --> The next e-mail shows more during and > -->> > --> > > --> after shots of the bed. I > -->> > --> think there > -->> > --> > > --> is a comparison of core supports too. > -->> > --> > > --> > -->> > --> > > --> I hope you are enjoying your new job and > -->> > --> > > --> shorter commute. > -->> > --> > > -->> > --> > the hours are a bit challenging... getting up at 5:30am > -->> > --> > is quite > -->> > --> difficult... ;) > -->> > --> > > -->> > --> > john > -->> > --> > > -->> > --> > > --> > -->> > --> > > --> Ttyl, > -->> > --> > > --> > -->> > --> > > --> Curtis > -->> > --> > > --> > -->> > --> > > -->> > --> > ---- > -->> > --> > > -->> > --> > ------------------------------------------------------------------------- > -->> > --> > ** http://JohnMeister.com **** > -->> > --> > http://wagoneers.com ** > -->> > --> > Snohomish, Washington USA - where Jeeps don't > -->> > --> > rust, they mold > -->> > --> > ** http://freegift.net *** > -->> > --> > http://greatcom.org/laws/languages.html ** > -->> > --> > ------------------------------------------------------------------------- > -->> > --> > -->> > --> > -->> > -->> > -->> ---- > -->> > -->> ------------------------------------------------------------------------- > -->> ** http://JohnMeister.com **** http://wagoneers.com ** > -->> Snohomish, Washington USA - where Jeeps don't rust, they mold > -->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > -->> ------------------------------------------------------------------------- > -->> > -->> > --> > --> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ End of fsj-digest V1 #2539 **************************