From owner-fsj-digest-at-digest.net Sat Nov 19 10:10:27 2005 From: fsj-digest fsj-digest Saturday, November 19 2005 Volume 01 : Number 2540 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: fsj: Re: SuperDawg Pix 1 fsj: Re: SuperDawg Pix 1 fsj: Re: xj: Adding Wiring for Trailer Lighting FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Fri, 18 Nov 2005 06:52:41 -0800 (PST) From: john Subject: fsj: Re: SuperDawg Pix 1 On Fri, 18 Nov 2005, Neal Hoover wrote: >-->keep it up, Curtis! >--> >-->btw, not to steal a thread, but does anyone know where i can get a rust-free >-->(ha) 7' fleetside bed? >-->none of the beds i have are worth the trouble right now, and i'm trying to >-->find a good one. someone was offering a free late '60's gladiator up on one of the islands... of course that's not going to help you way back east... john >--> >-->thanks! >--> >-->Neal A. Hoover >-->Project '76 J-10 >-->Project '96 XJ >-->http://community.webshots.com/user/proj96xj >--> >--> >-->----- Original Message ----- >-->From: "Curtis" >-->To: "john" >-->Cc: "Neal Hoover" ; "full size jeep list" >--> >-->Sent: Friday, November 18, 2005 3:16 AM >-->Subject: Re: SuperDawg Pix 1 >--> >--> >-->> Ok you guys. As much as I hate to admit it, SuperDawg has been on those >-->> dollies since 2002. Also, I have been using that same method since the >-->> 80's. I am also sure that others have done it before me. >-->> >-->> As for the bedliner, it is Duplicolor bedliner. John brought me a can >-->> of it once and told me that it is what he wanted me to use, so I tried >-->> it and he liked it. It can be had at Schucks/Kraken/CSK auto parts >-->> stores among others for around $50 a gallon. The spraygun is just a >-->> cheap undercoating gun that I buy disposable cups for. If I remember I >-->> will get a picture of it tomorrow and send it to John to post on his >-->> website. The gun, or reasonable facsimile, can be had for about $30 at >-->> the above mentioned autoparts stores, or pretty much any other auto >-->> paint supplier. >-->> >-->> As for the compliments, (In my best Elvis voice.) Thank you, thank you. >-->> :) >-->> >-->> Curtis >-->> >-->> >-->> >-->> john wrote: >-->> > On Thu, 17 Nov 2005, Neal Hoover wrote: >-->> > >-->> > >-->> >>-->hey, hold on a minute.... i thought that *I* was the one who came up >-->with >-->> >>-->the idea of a bed and cab trolly to make wheeling stuff around the >-->garage >-->> >>-->much easier.... >-->> > >-->> > >-->> > it's been done before... ;) >-->> > >-->> > >-->> >>-->http://community.webshots.com/photo/175759714/175760206scDMnJ >-->> >>-->and >-->> >>-->http://community.webshots.com/photo/175759714/359967949mTfWLd >-->> >>-->lol! >-->> >>--> >-->> >>-->nice work on the undercoating, John. what brand did you use? >-->> > >-->> > >-->> > same one curtis used on the trailer... It's the stuff you can >-->> > get at schucks, dupicolor I think... nice thing about it is you >-->> > can touch it up with a rattle can... have one out in the trailer. >-->> > >-->> > >-->> >>-->also, tell me about the spray gun. where'd you get it? and how much? >-->> > >-->> > >-->> > oh curtis... (he's got it all figured out... ;) >-->> > >-->> > john >-->> > >-->> > >-->> >>--> >-->> >>-->Neal A. Hoover >-->> >>-->Project '76 J-10 >-->> >>-->Project '96 XJ >-->> >>-->http://community.webshots.com/user/proj96xj >-->> >>--> >-->> >>--> >-->> >>-->----- Original Message ----- >-->> >>-->From: "john" >-->> >>-->To: "Curtis" >-->> >>-->Cc: "full size jeep list" >-->> >>-->Sent: Thursday, November 17, 2005 1:31 AM >-->> >>-->Subject: fsj: Re: SuperDawg Pix 1 >-->> >>--> >-->> >>--> >-->> >>-->> so the real question is, does it make the cab quieter? :) >-->> >>-->> >-->> >>-->> (hard to tell without glass I'd guess... ;) >-->> >>-->> >-->> >>-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html >-->> >>-->> >-->> >>-->> On Wed, 16 Nov 2005, Curtis wrote: >-->> >>-->> >-->> >>-->> > -->Hi John, >-->> >>-->> > --> >-->> >>-->> > -->Here are some pictures for your enjoyment. None of them are >-->labeled. >-->> >>-->> > -->These are before bedlining and after for the interior of the >-->cab. A >-->> >>-->few >-->> >>-->> > -->select pictures of my new lift too. >-->> >>-->> > -->The next e-mail shows more during and after shots of the bed. >-->I >-->> >>-->think there >-->> >>-->> > -->is a comparison of core supports too. >-->> >>-->> > --> >-->> >>-->> > -->I hope you are enjoying your new job and shorter commute. >-->> >>-->> >-->> >>-->> the hours are a bit challenging... getting up at 5:30am is quite >-->> >>-->difficult... ;) >-->> >>-->> >-->> >>-->> john >-->> >>-->> >-->> >>-->> > --> >-->> >>-->> > -->Ttyl, >-->> >>-->> > --> >-->> >>-->> > -->Curtis >-->> >>-->> > --> >-->> >>-->> >-->> >>-->> ---- >-->> >>-->> >-->> >-->>>-->> --------------------------------------------------------------------- >-->---- >-->> >>-->> ** http://JohnMeister.com **** http://wagoneers.com ** >-->> >>-->> Snohomish, Washington USA - where Jeeps don't rust, they mold >-->> >>-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html >-->** >-->> >-->>>-->> --------------------------------------------------------------------- >-->---- >-->> >>--> >-->> >>--> >-->> > >-->> > >-->> > ---- >-->> > >-->> >-->> ------------------------------------------------------------------------- >-->> > ** http://JohnMeister.com **** http://wagoneers.com ** >-->> > Snohomish, Washington USA - where Jeeps don't rust, they mold >-->> > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** >-->> >-->> ------------------------------------------------------------------------- >-->> > >-->> > >-->> >--> >--> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Fri, 18 Nov 2005 20:37:54 -0500 From: "Neal Hoover" Subject: fsj: Re: SuperDawg Pix 1 yeah, that's been my main problem. i can locate a few viable beds out west, but getting them here is the kicker. no less than $500 bones for shipping. and if i bought a complete rig and drove it back, it would be just about the same amount, let alone the purchase price! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "Neal Hoover" Cc: "Curtis" ; "full size jeep list" Sent: Friday, November 18, 2005 9:52 AM Subject: Re: SuperDawg Pix 1 > On Fri, 18 Nov 2005, Neal Hoover wrote: > > >-->keep it up, Curtis! > >--> > >-->btw, not to steal a thread, but does anyone know where i can get a rust-free > >-->(ha) 7' fleetside bed? > >-->none of the beds i have are worth the trouble right now, and i'm trying to > >-->find a good one. > > someone was offering a free late '60's gladiator up on one of the > islands... of course that's not going to help you way back east... > > john > > >--> > >-->thanks! > >--> > >-->Neal A. Hoover > >-->Project '76 J-10 > >-->Project '96 XJ > >-->http://community.webshots.com/user/proj96xj > >--> > >--> > >-->----- Original Message ----- > >-->From: "Curtis" > >-->To: "john" > >-->Cc: "Neal Hoover" ; "full size jeep list" > >--> > >-->Sent: Friday, November 18, 2005 3:16 AM > >-->Subject: Re: SuperDawg Pix 1 > >--> > >--> > >-->> Ok you guys. As much as I hate to admit it, SuperDawg has been on those > >-->> dollies since 2002. Also, I have been using that same method since the > >-->> 80's. I am also sure that others have done it before me. > >-->> > >-->> As for the bedliner, it is Duplicolor bedliner. John brought me a can > >-->> of it once and told me that it is what he wanted me to use, so I tried > >-->> it and he liked it. It can be had at Schucks/Kraken/CSK auto parts > >-->> stores among others for around $50 a gallon. The spraygun is just a > >-->> cheap undercoating gun that I buy disposable cups for. If I remember I > >-->> will get a picture of it tomorrow and send it to John to post on his > >-->> website. The gun, or reasonable facsimile, can be had for about $30 at > >-->> the above mentioned autoparts stores, or pretty much any other auto > >-->> paint supplier. > >-->> > >-->> As for the compliments, (In my best Elvis voice.) Thank you, thank you. > >-->> :) > >-->> > >-->> Curtis > >-->> > >-->> > >-->> > >-->> john wrote: > >-->> > On Thu, 17 Nov 2005, Neal Hoover wrote: > >-->> > > >-->> > > >-->> >>-->hey, hold on a minute.... i thought that *I* was the one who came up > >-->with > >-->> >>-->the idea of a bed and cab trolly to make wheeling stuff around the > >-->garage > >-->> >>-->much easier.... > >-->> > > >-->> > > >-->> > it's been done before... ;) > >-->> > > >-->> > > >-->> >>-->http://community.webshots.com/photo/175759714/175760206scDMnJ > >-->> >>-->and > >-->> >>-->http://community.webshots.com/photo/175759714/359967949mTfWLd > >-->> >>-->lol! > >-->> >>--> > >-->> >>-->nice work on the undercoating, John. what brand did you use? > >-->> > > >-->> > > >-->> > same one curtis used on the trailer... It's the stuff you can > >-->> > get at schucks, dupicolor I think... nice thing about it is you > >-->> > can touch it up with a rattle can... have one out in the trailer. > >-->> > > >-->> > > >-->> >>-->also, tell me about the spray gun. where'd you get it? and how much? > >-->> > > >-->> > > >-->> > oh curtis... (he's got it all figured out... ;) > >-->> > > >-->> > john > >-->> > > >-->> > > >-->> >>--> > >-->> >>-->Neal A. Hoover > >-->> >>-->Project '76 J-10 > >-->> >>-->Project '96 XJ > >-->> >>-->http://community.webshots.com/user/proj96xj > >-->> >>--> > >-->> >>--> > >-->> >>-->----- Original Message ----- > >-->> >>-->From: "john" > >-->> >>-->To: "Curtis" > >-->> >>-->Cc: "full size jeep list" > >-->> >>-->Sent: Thursday, November 17, 2005 1:31 AM > >-->> >>-->Subject: fsj: Re: SuperDawg Pix 1 > >-->> >>--> > >-->> >>--> > >-->> >>-->> so the real question is, does it make the cab quieter? :) > >-->> >>-->> > >-->> >>-->> (hard to tell without glass I'd guess... ;) > >-->> >>-->> > >-->> >>-->> http://wagoneers.com/tmp/superdawg-2005/ALL.html > >-->> >>-->> > >-->> >>-->> On Wed, 16 Nov 2005, Curtis wrote: > >-->> >>-->> > >-->> >>-->> > -->Hi John, > >-->> >>-->> > --> > >-->> >>-->> > -->Here are some pictures for your enjoyment. None of them are > >-->labeled. > >-->> >>-->> > -->These are before bedlining and after for the interior of the > >-->cab. A > >-->> >>-->few > >-->> >>-->> > -->select pictures of my new lift too. > >-->> >>-->> > -->The next e-mail shows more during and after shots of the bed. > >-->I > >-->> >>-->think there > >-->> >>-->> > -->is a comparison of core supports too. > >-->> >>-->> > --> > >-->> >>-->> > -->I hope you are enjoying your new job and shorter commute. > >-->> >>-->> > >-->> >>-->> the hours are a bit challenging... getting up at 5:30am is quite > >-->> >>-->difficult... ;) > >-->> >>-->> > >-->> >>-->> john > >-->> >>-->> > >-->> >>-->> > --> > >-->> >>-->> > -->Ttyl, > >-->> >>-->> > --> > >-->> >>-->> > -->Curtis > >-->> >>-->> > --> > >-->> >>-->> > >-->> >>-->> ---- > >-->> >>-->> > >-->> > >-->>>-->> ----------------------------------------------------------------- - ---- > >-->---- > >-->> >>-->> ** http://JohnMeister.com **** http://wagoneers.com ** > >-->> >>-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > >-->> >>-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html > >-->** > >-->> > >-->>>-->> ----------------------------------------------------------------- - ---- > >-->---- > >-->> >>--> > >-->> >>--> > >-->> > > >-->> > > >-->> > ---- > >-->> > > >-->> > >-->> ---------------------------------------------------------------------- - --- > >-->> > ** http://JohnMeister.com **** http://wagoneers.com ** > >-->> > Snohomish, Washington USA - where Jeeps don't rust, they mold > >-->> > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > >-->> > >-->> ---------------------------------------------------------------------- - --- > >-->> > > >-->> > > >-->> > >--> > >--> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Sat, 19 Nov 2005 10:03:50 -0800 (PST) From: john Subject: fsj: Re: xj: Adding Wiring for Trailer Lighting cool, glad it worked for you... I have to use it all the time too. :) john On Sat, 19 Nov 2005, hc carter wrote: > -->Great! Thanks! > -->- - - > --> > -->john wrote: > --> > -->> try: > -->> http://wagoneers.com/FSJ/tech/Wiring/Trailer-Wiring/ > -->> > -->> > -->> On Fri, 18 Nov 2005 hccarter-at-comcast.net wrote: > -->> > -->> > -->> > --> Hey! Hopefully this is an easy question! > -->> > --> > -->> > --> My 92 Comanche has a trailer hitch with a round (6 pin) > -->> > --> wiring connector. Years of scraping around the back have > -->> > --> messed the wiring up -and- I think I want to switch to a > -->> > --> standard flat 4 style connector. > -->> > --> > -->> > --> So, I think I am going to rip out the old wiring and re-wire > -->> > --> it. Are there any on-line sites with info on this? Will a > -->> > --> standard kit from a parts shop work OK? > -->> > --> > -->> > --> Thanks! > -->> > --> = = = > -->> > --> > -->> > > -->> > > -->> > -->> ---- > -->> > -->> ------------------------------------------------------------------------- > -->> ** http://JohnMeister.com **** http://wagoneers.com ** > -->> Snohomish, Washington USA - where Jeeps don't rust, they mold > -->> ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > -->> ------------------------------------------------------------------------- > --> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ End of fsj-digest V1 #2540 **************************