From owner-fsj-digest-at-digest.net Wed Apr 19 17:18:09 2000 From: fsj-digest fsj-digest Wednesday, April 19 2000 Volume 01 : Number 823 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: fsj: Re: axle numbers fsj: NOS WT/J-10 open center caps Re: fsj: NOS WT/J-10 open center caps Fw: fsj: Tailgate fsj: Re: Jeep convertion??? Re: fsj: Re: Jeep convertion??? fsj: 23 spline AW4 output shaft fsj: NOS pre-'73 Wag. lenses on Ebay FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Tue, 18 Apr 2000 12:22:09 -0700 (PDT) From: Carnuck-at-webtv.net (James Blair) Subject: fsj: Re: axle numbers Oops! I meant to ask, are they 2.72 gears or 3.31? Anyone know? Anyone? Ferris? Beavis? Off an '82 Wagoneer M20 (I didn't write them down) 428 =A0=A0215 1-at-3235428 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ JimBlair, Seattle,WA 1983 4.2L Chero 4dr http://homepages.go.com/~carnuck/carnuck.html Now appearing on allexperts.com Pics: http://albums.photopoint.com/j/AlbumList?u=3D13998&Auth=3Dfalse ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ------------------------------ Date: Tue, 18 Apr 2000 17:28:39 -0400 From: Michael Baxter Subject: fsj: NOS WT/J-10 open center caps If anyone is interested in a set of NOS center caps for the WT or J-10 15= " x 8" white spoke steel wheels contact the following e-mail address. These= are open for locking manual hubs. And they're for a '79 which should make= them the "big spline" version. Later WTs and J-10s with 15 x 8" white spo= ke wheel used the same center cap except there were fewer "splines" around t= he outer circumference. RPapetti-at-aol.com Michael Baxter, MBaxter-at-Compuserve.com-OR-N7OVD-at-arrl.net http://ourworld.compuserve.com/homepages/MBaxter From Reno, NV USA on 18-Apr-2000 ------------------------------ Date: Tue, 18 Apr 2000 14:56:06 -0700 (PDT) From: Carnuck-at-webtv.net (James Blair) Subject: Re: fsj: NOS WT/J-10 open center caps A: I don't need a set, but I do need one open cap for my wife's '84 Laredo. Some low life stole one off the truck while it was parked out front or downtown. Michael=A0Baxter wrote: fsj: NOS WT/J-10 open center caps If anyone is interested in a set of NOS center caps for the WT or J-10 15" x 8" white spoke steel wheels contact the following e-mail address. These are open for locking manual hubs. And they're for a '79 which should make them the "big spline" version. Later WTs and J-10s with 15 x 8" white spoke wheel used the same center cap except there were fewer "splines" around the outer circumference. RPapetti-at-aol.com =A0=A0Michael Baxter, MBaxter-at-Compuserve.com-OR-N7OVD-at-arrl.net http://ourworld.compuserve.com/homepages/MBaxter From Reno, NV USA on 18-Apr-2000 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ JimBlair, Seattle,WA 1983 4.2L Chero 4dr http://homepages.go.com/~carnuck/carnuck.html Now appearing on allexperts.com Pics: http://albums.photopoint.com/j/AlbumList?u=3D13998&Auth=3Dfalse ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ------------------------------ Date: Tue, 18 Apr 2000 20:18:28 -0600 From: "Kim Smith" Subject: Fw: fsj: Tailgate >A: There is a little spring that breaks, or the ratchet mechanism gets >rusty. I sprayed mine with PB'laster 2 years ago and it works great! >BTW, an AW4 can be home rebuilt for about $300 in parts! And, if you >have an SJ, it has a 727 or 999, not a 4 speed auto (unless like some >you have both SJ and XJ. Had to cover my butt there! It's sore enough >already!) The only trouble with the 999 is that it can be installed upside down, and then it is a beast to fix. kim '80 Wagoneer "J0E", 360 v2,T-727,NP219 ------------------------------ Date: Wed, 19 Apr 2000 06:10:12 -0700 (PDT) From: john Subject: fsj: Re: Jeep convertion??? On Wed, 19 Apr 2000, Cliff Antonakos wrote: Cliff Antonakos >-->I got your email from a fellow in the Jeep discussion group. Do you know >-->of anyone converting a wagoneer from gas to diesal. I have a 86 grand >-->wagoneer, which is in very good shape except for the engine. I was >-->wondering if I could convert it to a diesal? Do you have any info on the >-->subject? Have you heard of nyone doing it? Etc. Any info would be great. >-->Thanks. Cliff >--> haven't done it, but heard of others doing it. Not too hard really, just a matter of figuring out tranny stuff... :) john ---- - ------------------------------------------------------------------------- john-at-wagoneers.com **** http://wagoneers.com don't leave life without Jesus, please... Snohomish, Washington USA - ------------------------------------------------------------------------- ------------------------------ Date: Wed, 19 Apr 2000 09:41:08 -0700 (PDT) From: Carnuck-at-webtv.net (James Blair) Subject: Re: fsj: Re: Jeep convertion??? A: We have a few listers that have done the conversion already on the older ones. Maybe some newer ones too? I'll stick with the stroker I'm building! (core goes to the shop from Oly4x4 today and the crank comes out of Elmo next week, with the trans and xfercase going to Blackie temporarily so I can pass the Emission test and tow my old trailer to Tonasket in a week and a half. Today I go to B'ham court to deal with the stoned cop. Is HE going to be in for a surprise! You may even read about it in the paper! LOL!) John-at-wagoneers.com forwarded: Cliff Antonakos I got your email from a fellow in the Jeep discussion group. Do you know of anyone converting a wagoneer from gas to diesal. I have a 86 grand wagoneer, which is in very good shape except for the engine. I was wondering if I could convert it to a diesal? Do you have any info on the subject? Have you heard of nyone doing it? Etc. Any info would be great. Thanks. Cliff haven't done it, but heard of others doing it. Not too hard really, just a matter of figuring out tranny stuff... :) john ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ JimBlair, Seattle,WA 1983 4.2L Chero 4dr http://homepages.go.com/~carnuck/carnuck.html Now appearing on allexperts.com Pics: http://albums.photopoint.com/j/AlbumList?u=13998&Auth=false ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ------------------------------ Date: Wed, 19 Apr 2000 09:45:23 -0700 (PDT) From: Carnuck-at-webtv.net (James Blair) Subject: fsj: 23 spline AW4 output shaft I found a source for the shafts at $75 + tax and shipping if anyone is interested. (all 35 Oly4x4 has are supposedly in good shape and they won't core them out, but $600 still isn't bad for a complete one) I'm still trying to find a stand alone harness for the trans so I can run my carb for a bit til I figure whether or not I can get away with the HO EFI or if I have to run Renix to stop detonation on my stroker (My block goes to the shop today! WooHoo!) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ JimBlair, Seattle,WA 1983 4.2L Chero 4dr http://homepages.go.com/~carnuck/carnuck.html Now appearing on allexperts.com Pics: http://albums.photopoint.com/j/AlbumList?u=13998&Auth=false ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ------------------------------ Date: Wed, 19 Apr 2000 19:57:24 -0400 From: Michael Baxter Subject: fsj: NOS pre-'73 Wag. lenses on Ebay I'm almost certain this is the same pair of lenses I posted once before. Pre '73 rear Wag. lenses. One in the bag and one out. I think the left side's part # was listed in the description and the right side (which is out of the bag) part number is writen on masking tape and it is legible i= n the picture. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=3D312567744 In case I get this URL reversed with the next one: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=3D312655039 Michael Baxter, MBaxter-at-Compuserve.com-OR-N7OVD-at-arrl.net http://ourworld.compuserve.com/homepages/MBaxter From Reno, NV USA on 19-Apr-2000 ------------------------------ End of fsj-digest V1 #823 *************************